Descent Piper Archer III PA-28-181 step by step,

WELCOME ADVANCE FLYING ACADEMY

DESCENT

NORMAL

Throttle ........................................2500 rpm

Airspeed........................................122 KIAS

Mixture ...............................................RICH

Carburetor heat ..................ON if required

POWER OFF

Carburetor heat ...................ON if required

Throttle................................................closed

Airspeed....................................as required

Mixture .....................................as required

Power .........................verify with throttle

every 30 seconds

To achieve the performance the power on descent must be used. The throttle should be set for 2500 RPM, mixture full rich and maintain an airspeed of 122 KIAS. In case carburetor ice is encountered apply full carburetor heat.

POWER OFF

If a prolonged power off descent is to be made, apply full carburetor heat prior to power reduction if icing conditions are suspected. Throttle should be retarded and mixture control leaned as required. Power response should be verified approximately every 30 seconds by partially opening and then closing the throttle (clearing the engine). When leveling off enrichen mixture, set power as required and select carburetor heat off unless carburetor icing conditions are suspected.

👉 PIPER ARCHER III PA 28-181 HANDBOOK

👉 PREFLIGHT INSPECTION

👉 MISCELLANEOUS

👉 BEFORE STARTING ENGINE

👉 NORMAL START - COLD ENGINE

👉 NORMAL START - HOT ENGINE

👉 ENGINE START WHEN FLOODED

👉 STARTING WITH EXTERNAL POWER

👉 WARM-UP

👉 TAXIING

👉 GROUND CHECK

👉 BEFORE TAKEOFF